Briggs A1280 Fill Valve

This is the Briggs A1280 fill valve. It will come with the replenish tube, float, and the nut to secure the fill valve to the tank. The float can be adjusted by pushing the white clip on the side away from the float for major adjustments. Once you have made the adjustment make sure to press the tab back in to secure the float in place. You can make minor adjustments by turning the threaded portion to the left to lower the float, and right to raise the float. The fill valve has a total height of about 11 and 1/4 inches from the base of the threads to the top of the blue cap. The base of the fill valve at the threads has an outer diameter of roughly 1 inch. The replenish tube will have a total length of about 4 and 1/2 inches. Once again, this is the Briggs A1280 fill valve.