Genuine Briggs B351219 Fill Valve Free Shipping

Genuine Briggs B351219 Fill Valve. This valve works for the Briggs models 4800, 4802, 4803, 4804, and 4805. The B351219 comes complete with the replenish tube, supply line nut, gasket, and the nut to secure the fill valve to the tank. To install a fill valve the first step is to shut the water supply off to the tank, and disconnect the supply line from the bottom of the fill valve. Once the line is disconnected from the valve it is extremely important to flush the stop out. You can do this by, placing the end of the supply line into an empty bucket, and letting the water run through the line for a few seconds. You will then turn the water off, and back on. It is recommended to repeat this step at least two to three times. It will insure no debris flows directly into the new fill valve. After the stop has been flush out you will remove the nut from the base of the fill valve, and remove it from the tank. The next step is to place the new fill valve into the tank, and secure it with the nut provided. The final steps are to connect the supply line, and turn the water on.