Briggs
Genuine Briggs B500059 Fill Valve Free Shipping
Couldn't load pickup availability
The Genuine Briggs B500059 Fill Valve comes complete with the replenish tube, replenish tube clip, gasket to seal between the fill valve and take, as well as the nut to secure the fill valve to the tank. This fill valve is designed for Briggs tank models 4400, 4401, 4404, 4408, and 4411. To install this valve the first step is to shut the water supply off, and disconnect the supply line from the bottom of the existing valve. You will then loosen the nut securing the valve to the tank, and lift the complete fill valve assembly out of the tank. Before installing the new valve you will need to flush the stop out. You can do this by placing the end of the supply line into an empty bucket, and turning the water supply on. You will then let the water flow through the line for a few seconds, and then shut the water off. It is recommended to repeat this process at least 2 to 3 times. To insure no debris flows directly into the new fill valve, which can damage the inner components of the fill valve. The next, and final step of the installation is to secure the new fill valve with the nut supplied, and then connect the supply line, and turn the water on.
Materials
Materials
Shipping & Returns
Shipping & Returns
Dimensions
Dimensions

-
Free Shipping
Free Shipping to the lower 48 US states. Other areas and options are quoted at checkout.
-
Hassle-Free Exchanges
An unused part in its original packaging can be returned to exchange for another item. Toilet Seats Are Not returnable.